[DODGER 03]

does this sound good for my 03 hemi, i do not know what i need will yall help me out.
This auction is for a used Innovative Turbo Systems(ITS) 60-1 Turbo. It has a stage five(the bigger one) turbine wheel, 60-1 commpressor wheel. Oil cooled center section, T3 turbine inlet, 4 bolt outlet. The Turbine housing has been Ceramic Coated Black and looks great. It has a the 4" inlet and 2 1/2" outlet compressor housing ( i think it is the T04S model)and is polished. Turbo is in great shape, I bought it and had the Turbine housing coated and ran it for a season, turbo made 435hp at 23psi on my SR20det. Let me know if you have any other questions or if you are a serious buyer I will send you some more pictures if you would like. Here is a link to their web site, It is basiclly this turbo but has a 4" inlet on the compressor.

 

[1FASTV8]

60-1 is too big for remote and a little too small for underhood. I already mapped it out.

 

[DODGER 03]

tell me what turbo i need and what size turbine and all that specific sh@t. like and what size inlet and out or if you could just find me a turbo for a rear mount like the sts kit

 

[1FASTV8]

inlet and outlet is useless. You want rear or underhood?

 

[SRT10KLLR]

The STS turbo comes standard with a Garrett 60-1.

 

[hemifever]

The T60-1 runs great as a rear mount on the hemi. I had a T60 (not the -1) and it was too small. EGT's were high and it wouldn't hold boost as my rpms increased. The 60-1 doesn't have that issue.

 

[ColtSteele]

If you're interested in a polished T-61, ceramic ball bearing, all the good stuff, I know where you can pick one up pretty reasonable

Shoot me PM