[Ghost03hemi]

I would say in the 60 range will do fine

SRT4 stage 2 injector would work good with the present tune. Just have to lower the fuel pressure a little.:thumb:

 

[kcd1369]

I wanna be just like you guys when (if) I grow up. :thumb:

 

[charged392]

Go to a gtg at speedworld and take a ride with one of us I will have to lift at the 1/8 bit it will be a fun as ride nonetheless

 

[Ghost03hemi]

Will all know what's going to happen then..........:brows:

Hi, my name is David. And I'm addicted to Hemi Boost.......:rofl::danger:

 

[charged392]

Dyno sheet so far from randy with my longbars on his truck up north still a little rich but crazy numbers for a s/c 418

 

[kcd1369]

Will all know what's going to happen then..........:brows:

Hi, my name is David. And I'm addicted to Hemi Boost.......:rofl::danger:

Oh no. Not yet. I still need to use it for work. :danger::danger:

But I do think I will be looking for a reg. cab 05 to start playing with in the near future. Or something like that. :thumb:

 

[Hemidup]

Keith, Need a favor. Can you get me the part # from your oringinal PCM? And good luck at the track this weekend.

 

[Redtruck-VA]

I have the number for a March built 03 SXT if that would help.

 

[charged392]

Yes will get it around 530 at house and post up

 

[charged392]

P56028958ah

 

[Hemidup]

Is that that the part number thats stickered on the PCM or the oringinal PCM calid number?

 

[charged392]

Says pn#

This is a sticker over top of the old one for some reason the original I cannot read its covered and tears of I try to remove it

 

[charged392]

Te new PCM I have is

1-RL028930ab

 

[Hemidup]

Mine has a sticker over the oringinal. I can't read the sticker anymore, but the oringinal is 56028930AB which was the current part number for the 05's. Don't know where my sticker came from since my truck has never been to a dealer. They put the sticker over the oringinal once the PCM has been flashed. The 05 and 06 now share the same part # and the current part number of RL50948930AB supercides the old 56028930AB and the oringinal 06 PCM part # which was 50948930AA

 

[charged392]

I have both of those I listed and I swap them back and forth to use two did tunes without having to load a new one unless adjusting something

 

[charged392]

Well mod list sheunk a tiny bit not much left to do from this point


1. New wide band guage mine melted from heat in window from my mr2 was only matter of time before it got to this almost unreadable state.
2. 3" pulley for more boost
3. 1200 impellar upgrade/rebuild
4. ? Well huh if I need to I will lol

I will hit 11s very soon which will be good enough for me if I come anywhere near an 11.3 I'm caging the truck simply Because at that point I know I will want to go faster and it's a truck it's heavy and fast better safe than sorry gotta be around for awhile.

 

[Redtruck-VA]

Cages are a major build. We all know you are dedicated to going fast but damn that's extreme.. There's no hopping in and out of a caged vehicle...

 

[charged392]

Yeah sure there is hinged door bar you pin at track good for somewhere in the 9s then it has to be solid.

 

[charged392]

Well mod list grew today again got a free 92mm lsx throttle body was able to wire it and start truck up rev and drive fine with no codes but idle it won't due needs a little adjusting I think. The throttle is good buddy swapped of his running car today and it bolts right to the XV neck it's drilled/tapped for it factory. This will help a decent amount if I can get it to idle. It's so snappy with it gonna be nice hopefully it will work

 

[Redtruck-VA]

Well mod list grew today again got a free 92mm lsx throttle body was able to wire it and start truck up rev and drive fine with no codes but idle it won't due needs a little adjusting I think. The throttle is good buddy swapped of his running car today and it bolts right to the XV neck it's drilled/tapped for it factory. This will help a decent amount if I can get it to idle. It's so snappy with it gonna be nice hopefully it will work

Is this a DBW TB? Can you post some pictures? I found the hemi likes big TB's.....:coolsmiley: