It's Keith's turn. :thumb::thumb::thumb:opcorn:

 

How much are you paying for the bigger supercharger Keith?

 

$3100 :hide: but I won't be needed a new one until I clear 1200hp lol

It was the blower that will bolt right on or a gt5533r turbo for same price and a ton of fab so I chose the easy route.

 

$3100 :hide: but I won't be needed a new one until I clear 1200hp lol

So there's room to grow into it. :brows: :SWEET1:

 

Oh yeah I have until 1200hp on motor then I can just spray it past that point.

 

With that kind of horsepower you can get hurt... First build a pro chassis and drop your body on it. Then toss in the 1200hp motor. Some years ago I remember some guy in Chicago built a Ram with a tube frame, but I think he was all about show, not racing.

 

I brake 11.5 or faster there will be a cage going in the truck. With that much weight and that much speed a seat belt isn't gonna work to well on its own. I wanna be able to see my kids grow up of you get what I'm saying.

 

I hear you, look at the trouble the folks get into with the flying mile and lake runs. Speed is speed.... must be respected..

 

Yep

 

Your truck should make it into the 11s with 1200hp Keith.....

 

:hide:
:lol:

 

That and some while in street trim....

 

:fighting0092: :rofl:

 

Keith, that is awesome. You day man.

 

Ok this is gonna be fun for sure look at my speed calculater will Na almost 20k shy of blower max making the same if not more boost with kess drag and a lot less heat. I will also be directly in the perfect middle top of map. According to vortech maps this is going to spot on what I need.

 

Here is what the novi 1200 map is basically. Perfect for a 5.7 engine and some heads and cam stuff and a stroker on low boost.

 

The v-7 YSI map going to dead on what I need for my engine.

 

I need some education and a clearer picture before I can interpret the graphs. lol

 

I hear ya on that one...

 

They are engine air demand vs boost charts. The YSI is perfect you want to generally stay in the middle to top of the smallest circle for the coolest air and boost pressure. Going into the second circle is fine but the third is where the boost device will flatten out.

 

NA for a little bit for me lol. Time to make some brackets.

 

:dance::dance::dance:









Old information lurking from the bad ole days...
A 350 sbc turning 6000 would flow number wise 650 cfm. Possibly better info would be... 14.7 psi is one atmosphere, so if you were pushing 7psi basically one half of atmosphere your engine would think it was over 500 cubic inches and flowing 975 cfm at 6000rpm. Seems a NOVI 1200 is plenty big enough for a moderate increase......:brows:

 

opcorn:opcorn:opcorn:

 

:sad: blower still not shipped and may not until the 5th :sad: but it's a good thing gives me time to mock up the spare plate for the kit I'm sending north.

Driving truck NA right now and it's so slow in comparison to what I an use to lol but this is also good lets me dial my trims in the area that I would normally never be able to hit without getting into boost throttle wise.

 

Driving truck NA right now and it's so slow in comparison to what I an use to

Yep, boost is where it's at. :thumb::thumb::thumb:

 

Sorry for your delay, now get busy brother.....

 

Well brackets are made for the most part now to tap some holes Monday after work forgot my KIT. :facepalm: then test got it to the truck and make sure all is well. If all goes to plan get 2 oddly long bolts that nobody seems to have and box it all up shortly to ship. I hope my new blower gets mailed Monday.

 

Well brackets are made for the most part now to tap some holes Monday after work forgot my KIT. :facepalm: then test got it to the truck and make sure all is well. If all goes to plan get 2 oddly long bolts that nobody seems to have and box it all up shortly to ship. I hope my new blower gets mailed Monday.

----------------------------------------------------

:dance::dance:
:thumb:

 

Sweet! I need to get busy and caught up on my end..

 

:thumb::thumb:

 

YSI TRIM BLOWER IS IN THE MAIL!!!! going to be a fun weekend this week! Going to track Friday letting Becca drive the truck NA for a baseline! If it runs anywhere in the 12s range the 1200 has been killing me rather than helping me. We will see. Going to dial my NA trims in now since I have never ran the truck NA except to drive it home from dealer lol. I'm am very curious to see what happens Friday.looking for at least around 12.8-13.5 I hope lol we will see. My cam is a blower cam not a NA cam so what will it be lol?

 

Going to track Friday letting Becca drive the truck NA for a baseline!

 

Becca drive the truck NA for a baseline! looking for at least around 12.8-13.5

13.2 is very possible without the drag of the supercharger.