here is the final product blue is what i chose to do very close to the flames color to

 

hard to see the real color its alot brighter than it looks in the picture

 

 

 

Nice job Keith!

 

Nice Job Keith

 

Today I got a free fuel pressure gauge needed one for awhile and got one handed to me for free it's a mechanical gauge so it has to stay outside the truck but I don't mind I like the look of gauge on the cowl will post some pics tomm of completed install I took a single pillar pod sanded it down and mounted it directly to the cowl in front of me not the neatest install but it's a good gauge to have tested it the other day and the fuel psi dropped down to 42 psi under wot need to go to the 400lph a 255 doesn't have enough ass

 

 

 

 

this is a shot of my pieced together exhaust tipped with an aero3030xl very nice muffler

 

here is a shot of the bar from underneeth the truck on the lift its so longggggg

 

and here it is finally got some good weather for the pics the free fuel guage mounted to the cowl

 

side view

 

Man I really need to re do my exhaust.

 

inside view and i still have a free hole not sure what i will put there but something maybe a second afr guage to monitor both banks not sure yet

 

Nice job Keith.

 

Get a aeroforce scan gauge

 

That is a bad a** gauge maybe soon I will live knock is a good thing to see saving needed

 

 

Looking good Keith.

 

Well still on the way home from the rally it's 8:30 now another 4hrs and I will be home but I have. Few mods planned have to check with Neil for his prices and my fuel pump upgrade will be doing a full write up on that one here soon

just sold the house too so now i have to find a bigger house with a 2+ car garage would be nice and then let the mods really begin

 

Originally posted by charged392:
just sold the house too

 

Originally posted by charged392:
just sold the house too

 

Well did another mod today remember the overheat in traffic at rally issue well I have officialy fixed it I moved the fan out to the front of the shroud so it has to pull air from the entire radiator not just where the fan was strapped to the radiator will post pics in a little bit