Good evening. We are having a problem with the brakes on my 2005 1500 single cab 5.7 hemi after changing the front calipers, all brake pads, all four rotors, and even the master cylinder. We have beld the lines 100 times and there is no air pockets, but the brake peddle still goes all the way to the floor when trying to stop the truck. We had to replace the front calipers because the piston on the passenger was locked up and the caliper on the driver side had a crack. I don't know what else we can try or replace. Any advice would be welcomed!
Brake problem
Ashoz83
1 - 6 of 6 Posts
Good evening. We are having a problem with the brakes on my 2005 1500 single cab 5.7 hemi after changing the front calipers, all brake pads, all four rotors, and even the master cylinder. We have beld the lines 100 times and there is no air pockets, but the brake peddle still goes all the way to the floor when trying to stop the truck. We had to replace the front calipers because the piston on the passenger was locked up and the caliper on the driver side had a crack. I don't know what else we can try or replace. Any advice would be welcomed!
Joined
·
4,594 Posts
Joined
·
7,453 Posts
Welcome to our Hemi Family!! 
Joined
·
18,376 Posts
Don’t adjust the rod in the booster not needed.
Calipers are they on the correct sides bleeders pointing up?
did you bleed the master first before hooking to lines on the truck?
Calipers are they on the correct sides bleeders pointing up?
did you bleed the master first before hooking to lines on the truck?
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
