10-06-2017, 05:11 PM
Join Date: Jan 2011
It was a good day. It did get hot around noon. I welded two U bolts to the top of the trans cross member and two loops on the rear frame. Redid the tie-down straps putting J hooks on the ends. Now it is easy to reach under the truck to hang the hooks and pull them tight. Before I had to get my fat a$$ under the truck and wrap a chain around the axle and cross member which was a real hassle. Still not fun, but a lot better..
2003 RCSB, 2wd, "Pro-Street"
6.4L/cog driven V7-Ysi/46rh trans/HTH Truckarm coilover suspension. HP Tuning...
1956 Jeep Pickup Hemi powered "Street Rod project"
1# 2017 HTC FASTEST HEMI List....
Current 1/4 mile [email protected]
Current 60' PB 1.351 (2019) mechanical issue for 1/4m
HTC 2018 TOTY
Support vehicle- 2007 QC G56 4x4 diesel