Let's talk Cams - Hemi Truck Club
 
Go Back   Hemi Truck Club > State Chapters of HTC.com > Florida Chapter

Reply
 
Thread Tools Display Modes
 
Old 08-14-2014, 11:56 AM   #1
Member
 
HemiSport07's Avatar
 
Join Date: Feb 2012
Location: Central fl
Posts: 88
Let's talk Cams

What kind of cams are y'all running I see one in my near future I like the sound of a 268 comp but I thinking a need a little but more of a torque cam.....

__________________
3" Zone Bl 35" Nitto 20" Monsters Flowmaster Diablo Volant Aerforce SRT 10 Pillar UWS low pro LED domes
HemiSport07 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 08-14-2014, 01:12 PM   #2
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,313
Garage
I'm running a custom comp blower cam so that's out.

A 6.1 cam is cheap and will add a decent amount of both hp/tq a 268 is a good bet too. In your case if your looking for some hp and mainly torque give comp a call and talk to them about a custom grind they can set you up with a more torque rated cam for sure.
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 08-14-2014, 01:47 PM   #3
Senior Member
 
FASTHEMIRAM05's Avatar
 
Join Date: Oct 2009
Location: Orlando, FL
Posts: 2,360
KRC210x
__________________
Modern Performance Engineering
Had 2002 4.7 RCSB 14.2
Had 2011 RCSB 12.41
Had 2012 RCSB 13.99
Had 2016 QCSB 13.0
2011 Drag Truck....

FASTHEMIRAM05 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 08-14-2014, 03:10 PM   #4
Member
 
HemiSport07's Avatar
 
Join Date: Feb 2012
Location: Central fl
Posts: 88
I'm no motor builder by no means is it the lower the lsa that gives you the chop to the cam?
__________________
3" Zone Bl 35" Nitto 20" Monsters Flowmaster Diablo Volant Aerforce SRT 10 Pillar UWS low pro LED domes
HemiSport07 is offline   Reply With Quote
Old 08-14-2014, 03:58 PM   #5
Greg
 
Redtruck-VA's Avatar
 
Join Date: Jan 2011
Location: Virginia
Posts: 19,177
Garage
Like Keith said call the grinder for advice.
__________________
2003 RCSB, 2wd, "Pro-Street"
6.4L/cog driven V7-Ysi/46rh trans/HTH Truckarm coilover suspension. HP Tuning...

1956 Jeep Willys Pickup Hemi powered "Street Rod project"

1# 2017 HTC FASTEST HEMI List....
Current 1/4 mile [email protected] (2018)
Current 60' PB 1.351 (2019) mechanical issue for 1/4m

HTC 2018 TOTY

Support vehicle- 2007 QC G56 4x4 diesel
Redtruck-VA is offline   Reply With Quote
Old 08-14-2014, 08:10 PM   #6
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,313
Garage
Yes the lower the choppier for sure and the less torque off the bottom. Low LSA cams tend to be high rpm cams. Give comp a call see what they say its free to get an answer why not.
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 08-14-2014, 09:02 PM   #7
Stu
 
Join Date: Oct 2009
Location: FL
Posts: 20,455
Garage
KRC210 rv cam has good bottom end tq with 4.56 gears.
Ghost03hemi is offline   Reply With Quote
Old 08-14-2014, 09:08 PM   #8
Slow Memeber
 
04sthemi's Avatar
 
Join Date: Oct 2011
Location: S.Daytona
Posts: 5,470
Talk to Jmgak47 he'll set you in the right path
__________________
04sthemi is offline   Reply With Quote
Old 08-14-2014, 11:06 PM   #9
Member
 
HemiSport07's Avatar
 
Join Date: Feb 2012
Location: Central fl
Posts: 88
I've tried to get ahold of stu at inertia 3-4 times no luck I guess I'll be giving Comp or PPP a call
__________________
3" Zone Bl 35" Nitto 20" Monsters Flowmaster Diablo Volant Aerforce SRT 10 Pillar UWS low pro LED domes
HemiSport07 is offline   Reply With Quote
Old 08-31-2014, 08:57 PM   #10
Senior Member
 
jmgak47's Avatar
 
Join Date: Dec 2011
Location: Mount Pleasant, Tx
Posts: 106
Holler @ me man, I will fit you with what your wanting and needing for your goals.

Jay
__________________
2014 RAM 1500 Express QC 2wd Hemi

5.7 Stock Block
1/4 - 12.18 @ 110.15 NA
1/8 - 7.74 @ 89.06 NA

426 Stroker
1/8 - 7.16 @ 95.79 NA
jmgak47 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 04:01 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.