Yesterday's little project - Hemi Truck Club
 
Go Back   Hemi Truck Club > General Maintenance | Owner Info > Interior and Exterior Detailing

Reply
 
Thread Tools Display Modes
 
Old 06-05-2016, 09:44 AM   #1
Enormous Member
 
Hugh Jassole's Avatar
 
Join Date: Nov 2014
Location: Howell, NJ
Posts: 1,154
Garage
Yesterday's little project

The SRT 4 seats are in. Simple swap, just needed to to make a couple of adapters to attach the seats to the ram rails. Just used some 3/16 thick by 2" steel flat stock & Grade 8 bolts and lock nuts. The seat position is much improved, as well as the support. Now bot of my truck have srt4 seats. Its really nice simple/straightforward upgrade.

PS, I even still have the power seat working
Attached Images
File Type: jpg NCM_0169.jpg (43.2 KB, 8 views)
File Type: jpg NCM_0170.jpg (38.2 KB, 4 views)

__________________
My other truck is an R/T

2005 Hemi Ram Sport RC 2wd Yellow. 340RWHP, 350RWTQ
Comp 268 cam, P.I.E. Milled & Ported Heads with 2.02/1.65 Manley backcut valves, Compression bumped to 10.5:1, 6.1 Springs & Pushrods, Pacesetter Longtubes, 87MM Moe's TB, VaraRam Hemi Under Glass Ram Air Intake, PATC flexplate, 46RH Conversion By Martin Saine w/Full manual VB & 3500 stall convertor, Diablo Tuned by Jay Greene, Dual 3" Exhaust w/ SpinTech 5000 series dual in & out muffler (dumped)., Taylor Shorties, Spindle & Flip 5/7 drop, Energy Suspension Urethane bushings F & R, SRT 20s, Cal-Tracs, Street Scene Grill Inserts, Hurst 1/4 Stick floor shifter, SRT-4 Seats, Belltech Street Perfomance Shocks......this all started as an exhaust replacement/upgrade & new tires project. WTF !?
Hugh Jassole is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 06-05-2016, 09:54 AM   #2
Greg
 
Redtruck-VA's Avatar
 
Join Date: Jan 2011
Location: Virginia
Posts: 19,029
Garage
They look great... well done..
__________________
2003 RCSB, 2wd, "Pro-Street"
6.4L/cog driven V7-Ysi/46rh trans/HTH Truckarm coilover suspension. HP Tuning...

1# 2017 HTC FASTEST HEMI List....
Current 1/4 mile [email protected] (2018)
Current 60' PB 1.351 (2019) mechanical issue for 1/4m

HTC 2018 TOTY

Support vehicle- 2007 QC G56 4x4 diesel
Redtruck-VA is offline   Reply With Quote
Old 06-05-2016, 11:12 AM   #3
Enormous Member
 
Hugh Jassole's Avatar
 
Join Date: Nov 2014
Location: Howell, NJ
Posts: 1,154
Garage
Thanks. If you didn't know better, you'd swear they were stock. I just need to figure out a trim panel for the outside facing side of the seat regulator. Like the one that hangs down on the stockers. The rails/regulator being visible looks a bit unfinished to me. The black towels are to prevent wear, tear & seed burns/pops
__________________
My other truck is an R/T

2005 Hemi Ram Sport RC 2wd Yellow. 340RWHP, 350RWTQ
Comp 268 cam, P.I.E. Milled & Ported Heads with 2.02/1.65 Manley backcut valves, Compression bumped to 10.5:1, 6.1 Springs & Pushrods, Pacesetter Longtubes, 87MM Moe's TB, VaraRam Hemi Under Glass Ram Air Intake, PATC flexplate, 46RH Conversion By Martin Saine w/Full manual VB & 3500 stall convertor, Diablo Tuned by Jay Greene, Dual 3" Exhaust w/ SpinTech 5000 series dual in & out muffler (dumped)., Taylor Shorties, Spindle & Flip 5/7 drop, Energy Suspension Urethane bushings F & R, SRT 20s, Cal-Tracs, Street Scene Grill Inserts, Hurst 1/4 Stick floor shifter, SRT-4 Seats, Belltech Street Perfomance Shocks......this all started as an exhaust replacement/upgrade & new tires project. WTF !?
Hugh Jassole is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 06-05-2016, 12:11 PM   #4
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,240
Garage
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 06-05-2016, 01:15 PM   #5
Enormous Member
 
Hugh Jassole's Avatar
 
Join Date: Nov 2014
Location: Howell, NJ
Posts: 1,154
Garage
anyone want/need my stock seats ? Drivers side has a wear hole in back, next to the console. right side is clean
__________________
My other truck is an R/T

2005 Hemi Ram Sport RC 2wd Yellow. 340RWHP, 350RWTQ
Comp 268 cam, P.I.E. Milled & Ported Heads with 2.02/1.65 Manley backcut valves, Compression bumped to 10.5:1, 6.1 Springs & Pushrods, Pacesetter Longtubes, 87MM Moe's TB, VaraRam Hemi Under Glass Ram Air Intake, PATC flexplate, 46RH Conversion By Martin Saine w/Full manual VB & 3500 stall convertor, Diablo Tuned by Jay Greene, Dual 3" Exhaust w/ SpinTech 5000 series dual in & out muffler (dumped)., Taylor Shorties, Spindle & Flip 5/7 drop, Energy Suspension Urethane bushings F & R, SRT 20s, Cal-Tracs, Street Scene Grill Inserts, Hurst 1/4 Stick floor shifter, SRT-4 Seats, Belltech Street Perfomance Shocks......this all started as an exhaust replacement/upgrade & new tires project. WTF !?
Hugh Jassole is offline   Reply With Quote
Old 06-11-2016, 12:35 PM   #6
Senior Member
 
HemiFun05's Avatar
 
Join Date: Jul 2007
Location: College Station, Texas
Posts: 13,175
Thumbs up

Sweet Seats...Good Job


__________________
HemiFun05
'Doc'
"Christians Aren't Perfect - We Are Forgiven"
HemiFun05 is offline   Reply With Quote
Old 06-11-2016, 12:43 PM   #7
Gold-Member
 
kcd1369's Avatar
 
Join Date: Oct 2004
Location: Brandon, FL
Posts: 4,045
Garage
Looks great. Where did u find em?
__________________
05 1500 SLT Quad Black on Black | Pace Setter Long Tubes | Magna Flow Cat Back | Doug's Electric Cutout | Custom Ram Air Hood | Spyder LED Tails | Spec-D Black Projectors W/Halos | Flex-A-Lite E-Fan |Jet 180 Stat | K&N CAI | 20 inch wheels | Comp 268 Cam W/6.1 push rods and springs | Diablo Trinity | Custom Tune by Charged392.





kcd1369 is offline   Reply With Quote
Old 06-11-2016, 02:55 PM   #8
Enormous Member
 
Hugh Jassole's Avatar
 
Join Date: Nov 2014
Location: Howell, NJ
Posts: 1,154
Garage
Craig's List, $350. The right side had a small hole in it, but I have stock replacement covers coming from a buddy who had his redone in leather. Now that I've lived with them in the truck for a week, I'm even happier I did the swap. They keep you in place much better than the stockers
__________________
My other truck is an R/T

2005 Hemi Ram Sport RC 2wd Yellow. 340RWHP, 350RWTQ
Comp 268 cam, P.I.E. Milled & Ported Heads with 2.02/1.65 Manley backcut valves, Compression bumped to 10.5:1, 6.1 Springs & Pushrods, Pacesetter Longtubes, 87MM Moe's TB, VaraRam Hemi Under Glass Ram Air Intake, PATC flexplate, 46RH Conversion By Martin Saine w/Full manual VB & 3500 stall convertor, Diablo Tuned by Jay Greene, Dual 3" Exhaust w/ SpinTech 5000 series dual in & out muffler (dumped)., Taylor Shorties, Spindle & Flip 5/7 drop, Energy Suspension Urethane bushings F & R, SRT 20s, Cal-Tracs, Street Scene Grill Inserts, Hurst 1/4 Stick floor shifter, SRT-4 Seats, Belltech Street Perfomance Shocks......this all started as an exhaust replacement/upgrade & new tires project. WTF !?
Hugh Jassole is offline   Reply With Quote
Old 06-11-2016, 07:47 PM   #9
Stu
 
Join Date: Oct 2009
Location: FL
Posts: 20,375
Garage
The SRT4 seats look great.
Ghost03hemi is offline   Reply With Quote
Old 06-11-2016, 09:31 PM   #10
Gold-Member
 
kcd1369's Avatar
 
Join Date: Oct 2004
Location: Brandon, FL
Posts: 4,045
Garage
Quote:
Originally Posted by Hugh Jassole View Post
Craig's List, $350. The right side had a small hole in it, but I have stock replacement covers coming from a buddy who had his redone in leather. Now that I've lived with them in the truck for a week, I'm even happier I did the swap. They keep you in place much better than the stockers
How do you think they'll be on long drives.
__________________
05 1500 SLT Quad Black on Black | Pace Setter Long Tubes | Magna Flow Cat Back | Doug's Electric Cutout | Custom Ram Air Hood | Spyder LED Tails | Spec-D Black Projectors W/Halos | Flex-A-Lite E-Fan |Jet 180 Stat | K&N CAI | 20 inch wheels | Comp 268 Cam W/6.1 push rods and springs | Diablo Trinity | Custom Tune by Charged392.





kcd1369 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 11:43 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.