New Personal Best!!! - Hemi Truck Club
 
Go Back   Hemi Truck Club > HEMI | Performance Zone > Engine | Modifications, Repairs and Performance

Reply
 
Thread Tools Display Modes
 
Old 10-03-2011, 04:17 PM   #1
Senior Member
 
Blkram88's Avatar
 
Join Date: Feb 2011
Location: Michigan
Posts: 125
Didnt really know where to put this so I figured performance, got out to the track Saturday afternoon and ran a personal best of 14.30 @ 92 mph . Not the fastest truck on the block, but im proud of it. I Havent been to the track in more then a year and had a good list of mods to put to the test and they paid off for sure. To start I had a new tune from Hemifever, Sonnax line booster, Circle D 3000 stall converter, LT Heddmans, and a custom built 2.50" exhaust into Dynomax X muffler. This was done on full street trim, the way I ran the truck is how you would find me on the street. Next... I want 13's!!!!!! Ill try and get a video up soon, also got to beat up on a 4.6 Mustang GT.

__________________
Performance Mods: Custom CAI, Power wire, Heddmen LT's, Cat delete, Dynojet Wideband 2 A/F Gauge, Custom Bent 2.50" Full Exhaust Into A Dynomax Ultra Flo X Muffler Dumped Before The Rear Axle, NGK 4306 plugs, Taylor '409' 10.4mm race wires, Circle D 2800-3000 Stall Converter, Sonnax Line Booster, 1 Ton Tranny Cooler, Motive 4.56 Gears, Comp cams 268 cam, 6.1L pushrods, 6.1L exhaust valve springs, SCT custom tune.
Wish List: Comp Custom Cam, 85mm TB, Milled And Worked Heads, Bored 40 Over(If Motor Ever Lets Go,) StageIII Valve Body, E Fan(Waiting For Install)

Blkram88 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-03-2011, 04:17 PM   #2
Senior Member
 
Blkram88's Avatar
 
Join Date: Feb 2011
Location: Michigan
Posts: 125
Didnt really know where to put this so I figured performance, got out to the track Saturday afternoon and ran a personal best of 14.30 @ 92 mph . Not the fastest truck on the block, but im proud of it. I Havent been to the track in more then a year and had a good list of mods to put to the test and they paid off for sure. To start I had a new tune from Hemifever, Sonnax line booster, Circle D 3000 stall converter, LT Heddmans, and a custom built 2.50" exhaust into Dynomax X muffler. This was done on full street trim, the way I ran the truck is how you would find me on the street. Next... I want 13's!!!!!! Ill try and get a video up soon, also got to beat up on a 4.6 Mustang GT.
__________________
Performance Mods: Custom CAI, Power wire, Heddmen LT's, Cat delete, Dynojet Wideband 2 A/F Gauge, Custom Bent 2.50" Full Exhaust Into A Dynomax Ultra Flo X Muffler Dumped Before The Rear Axle, NGK 4306 plugs, Taylor '409' 10.4mm race wires, Circle D 2800-3000 Stall Converter, Sonnax Line Booster, 1 Ton Tranny Cooler, Motive 4.56 Gears, Comp cams 268 cam, 6.1L pushrods, 6.1L exhaust valve springs, SCT custom tune.
Wish List: Comp Custom Cam, 85mm TB, Milled And Worked Heads, Bored 40 Over(If Motor Ever Lets Go,) StageIII Valve Body, E Fan(Waiting For Install)

Blkram88 is offline   Reply With Quote
Old 10-03-2011, 04:19 PM   #3
Director Emeritus
 
MrHemi's Avatar
 
Join Date: Jun 2004
Location: Western NC
Posts: 40,856
Garage
__________________
2003 Ram 5.7 HEMI RC 2WD - Supercharged. 520 HP, 14 mpg... SOLD
2006 SRT8 GC AWD 6.1 HEMI - 420 HP, 16 mpg... SOLD
2005 Ram 5.7 HEMI QC 4X4 - bone stock work truck... SOLD
2009 Ram 5.7 HEMI QC 4X4 Laramie - bone stock for now

MrHemi is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-03-2011, 04:54 PM   #4
Board of Directors-Bill
 
arocketman's Avatar
 
Join Date: Aug 2007
Location: Space Coast, FL/Eastern Shore, Va
Posts: 12,488
Garage
__________________
05 QC
BLUE MAX
"Slightly Tweaked"
Just [email protected]




arocketman is offline   Reply With Quote
Old 10-03-2011, 05:43 PM   #5
Stu
 
Join Date: Oct 2009
Location: FL
Posts: 20,404
Garage
Good luck on the 13s.
Ghost03hemi is offline   Reply With Quote
Old 10-04-2011, 06:35 AM   #6
Board of Directors (Jay)
 
Superjay's Avatar
 
Join Date: Jun 2004
Location: Isle of Palms, SC
Posts: 43,454
__________________
2003, Std. SWB, SLT, 20", 4:56 gear, AFE CAI, Superchip, 6.1 cam, 6.1 heads, Manley springs, retainers, pushrods, Edelbrock Hedders, 195 T-Stat, 8.2 Taylor, AEM, Power Wire, ARC-1,Amsoil Everything, and more. Veni Vidi Vici

HTC.com Titan Killer Club

Member # 17



Superjay is offline   Reply With Quote
Old 10-04-2011, 08:10 AM   #7
Pavement Pounder
 
Budakane's Avatar
 
Join Date: Apr 2010
Location: Northern Virginia
Posts: 548
Garage
__________________
KILLER BEE #1/1
* Vararam * 90mm TB * Crazy Spartan Cam * LT Headers/3in Y-pipe * Bullet Cats * 3in CBE * 93 Octane Tune * 4:56 Gears * Auburn LSD * 3K Stall * Sharadon Stage III Valve Body * Traction Bars * Dual Electric Fans * HD Oil Cooler * HD Trans Cooler * HD Radiator * 180 Stat * 17in ST Wheels * M&H Drag Radials * 175 Wet Shot

1/4 Mile - 13.74 @98.53 - NA-Full Street Trim




Budakane is offline   Reply With Quote
Old 10-04-2011, 05:05 PM   #8
Senior Member
 
Blkram88's Avatar
 
Join Date: Feb 2011
Location: Michigan
Posts: 125
Thanks everyone, 13s are a long way away though
__________________
Performance Mods: Custom CAI, Power wire, Heddmen LT's, Cat delete, Dynojet Wideband 2 A/F Gauge, Custom Bent 2.50" Full Exhaust Into A Dynomax Ultra Flo X Muffler Dumped Before The Rear Axle, NGK 4306 plugs, Taylor '409' 10.4mm race wires, Circle D 2800-3000 Stall Converter, Sonnax Line Booster, 1 Ton Tranny Cooler, Motive 4.56 Gears, Comp cams 268 cam, 6.1L pushrods, 6.1L exhaust valve springs, SCT custom tune.
Wish List: Comp Custom Cam, 85mm TB, Milled And Worked Heads, Bored 40 Over(If Motor Ever Lets Go,) StageIII Valve Body, E Fan(Waiting For Install)

Blkram88 is offline   Reply With Quote
Old 10-04-2011, 06:41 PM   #9
Senior Member
 
Blkram88's Avatar
 
Join Date: Feb 2011
Location: Michigan
Posts: 125
i tired putting the video up though the add attachment but it didnt work, how can i put it up?
__________________
Performance Mods: Custom CAI, Power wire, Heddmen LT's, Cat delete, Dynojet Wideband 2 A/F Gauge, Custom Bent 2.50" Full Exhaust Into A Dynomax Ultra Flo X Muffler Dumped Before The Rear Axle, NGK 4306 plugs, Taylor '409' 10.4mm race wires, Circle D 2800-3000 Stall Converter, Sonnax Line Booster, 1 Ton Tranny Cooler, Motive 4.56 Gears, Comp cams 268 cam, 6.1L pushrods, 6.1L exhaust valve springs, SCT custom tune.
Wish List: Comp Custom Cam, 85mm TB, Milled And Worked Heads, Bored 40 Over(If Motor Ever Lets Go,) StageIII Valve Body, E Fan(Waiting For Install)

Blkram88 is offline   Reply With Quote
Old 10-04-2011, 07:04 PM   #10
Board of Directors
 
HemiByrd's Avatar
 
Join Date: Aug 2005
Location: Draffenville, KY
Posts: 25,097
Garage
Quote:
Originally posted by Blkram88:
i tired putting the video up though the add attachment but it didnt work, how can i put it up?
You could put it on something like Photobucket if you have an account. Then post the link to it.
__________________
'05 RCSB 1500 SLT 5.7 Hemi Ram - Airaid Long Snorkel UBI CAI - Taylor shorty wires - MSD Coil Packs Magnaflow y-pipe - Flowmaster 50HD - Superchips 3865 - Motive 4.56 gears - Detroit Truetrac - PML differential cover some good Karma 8.87 ET
HemiByrd is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 12:24 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.