Electric seat issue - Hemi Truck Club
 
Go Back   Hemi Truck Club > Technical Forums > General Repair Forum

Like Tree3Likes
  • 1 Post By charged392
  • 2 Post By Ironworker1911
Reply
 
Thread Tools Display Modes
 
Old 02-22-2019, 01:07 PM   #1
Junior Member
 
gengomerpyle's Avatar
 
Join Date: Sep 2006
Location: largo, florida
Posts: 23
Electric seat issue

I have a 2006 1500. The driver seat won’t go forwards or backwards. The right side of track move some but the left side track doesn’t. What’s the best way to fix this?

__________________
2006 quad hemi

gengomerpyle is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-22-2019, 06:47 PM   #2
Member
 
Join Date: Dec 2018
Posts: 45
the seats unbolts fairly easy I think 4 bolts or nuts to remove and you can lay it back to check everything,,if I read your post correctly its one side of the seat tries to move and other side doesn't ,,look in the track to see if something is lodged in it , I have seen a penny lodge in a seat track an prevent moving on one side
72rtchallenger is offline   Reply With Quote
Old 02-22-2019, 11:13 PM   #3
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,285
Garage
Something in the track or a broken motor output drive cable.
BeeFast likes this.
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 04-06-2019, 02:06 PM   #4
Member
 
Ironworker1911's Avatar
 
Join Date: Nov 2018
Posts: 64
Quote:
Originally Posted by 72rtchallenger View Post
the seats unbolts fairly easy I think 4 bolts or nuts to remove and you can lay it back to check everything,,if I read your post correctly its one side of the seat tries to move and other side doesn't ,,look in the track to see if something is lodged in it , I have seen a penny lodge in a seat track an prevent moving on one side
Never thought it could be something that simple for some reason.

Mine will move forward and backwards, and can tilt up/down the front section of the seat, but cannot tilt the rear section at all. I assume the button works because I can hear the motor, it just won't move the back part. Hopefully it is something that simple, I'm only 5'10" so it would be nice to be able to properly raise my seat up.
Ironworker1911 is offline   Reply With Quote
Old 04-06-2019, 04:31 PM   #5
Red Trucker
 
HemiLonestar's Avatar
 
Join Date: May 2010
Location: MD
Posts: 156
If the motor is running/working but nothing is moving then the drive portion is messed up, good chance it's an easy (and fairly inexpensive) fix.


https://www.genosgarage.com/category/seat-components/a
HemiLonestar is offline   Reply With Quote
Old 04-12-2019, 11:41 PM   #6
Member
 
Ironworker1911's Avatar
 
Join Date: Nov 2018
Posts: 64
Quote:
Originally Posted by HemiLonestar View Post
If the motor is running/working but nothing is moving then the drive portion is messed up, good chance it's an easy (and fairly inexpensive) fix.


https://www.genosgarage.com/category/seat-components/a
Sweet! Thanks I'll check it out in the morning.
Ironworker1911 is offline   Reply With Quote
Old 04-18-2019, 02:23 PM   #7
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,285
Garage
ever figure this out?
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 04-22-2019, 07:55 AM   #8
Member
 
Ironworker1911's Avatar
 
Join Date: Nov 2018
Posts: 64
Quote:
Originally Posted by charged392 View Post
ever figure this out?
No sir I haven't. Paid off my student loans last August, so I've been pretty much living out here at this plant trying to stack some money. When I do have a day off, usually have some family stuff planned. Will update when I get a chance to look at it.
charged392 and Redtruck-VA like this.
Ironworker1911 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 06:04 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.