Hemi Truck Club banner

Spec-D Tuning

926 views 2 replies 3 participants last post by  Redtruck-VA 
#1 ·
I put these onto my truck bc my old ones got hit hard by a rock from an 18wheeler. However, the OEM h13 got converted to an h1. Just with that conversion, a lot of wires were used to make it work. That's with just halogen, but I want to go to LED since my new fog lamps are that. I was told I need a canbus for the flickering I will see. No one can answer this question. Do I buy the canbus for the h13 side of wires or h1? Pic is of my new lights. I just need help with that little advice bc if it's the h13 side it's easy, but if it's the h1, there's gonna be a lot of cutting due to the dust cover. I don't really wanna cut stuff up unless necessary. Thanks in advance for your help
 

Attachments

See less See more
1
#3 · (Edited)
Jeremy built my projectors for red.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top