02-27-2013, 11:58 PM
|
#6
|
Senior Member
Join Date: Jun 2004
Location: Virginia Beach, VA
Posts: 13,698
|
Pretty sure the rear shock you want is this one:
P/N 33-104652, 5125 Off-Road, travel 11.0", collapsed 17.0", extended 28.01", eyelet ends:EB1* EB1* 1/2", valving 255/70, shaft dia. 14mm
BUT, you'll want to measure your stock shock length to verify!
Summit Racing should have the bushings and sleeves. They're a PITA to press in. Use white lithium grease on the outside of the sleeve/inside of bushing ONLY if you try to do it yourself on a press, but you'll probably want to have a professional install them.
|
|
|