Vararam Airgrabber

[RockwallRick]

I was wondering if it is possible to retrofit the Airgrabber to fit the 3rd Gen Hemi Truck? I am looking for something that will be functional with my SRT10 Hood. I currently have a functional albeit homemade setup but I love the look of the Vararam Airgrabber!!!

[surgicaltech2004]

This is what I've been looking at. http://www.summitracing.com/parts/vr...13-o/overview/

[SUPER BEE]

Originally Posted by surgicaltech2004

This is what I've been looking at. http://www.summitracing.com/parts/vr...13-o/overview/

That fits 4th gen only, 2013 & 2014 models.

[charged392]

They make a vararam for the 3rd gen I think. It has a cover but you can mod that.

[ATXHEMI]

Vararam Hemi Under Glass Intake 03-08 Dodge Ram 5.7L Hemi

[surgicaltech2004]

Originally Posted by ATXHEMI

Vararam Hemi Under Glass Intake 03-08 Dodge Ram 5.7L Hemi

I know I saw one at Summit racing like the one I posted. I thought I had it on my wish list but it some how got lost. I'll try to find it again when I get a chance. I remember the price being like $395.

[RockwallRick]

I sent an email to the folks at Vararam got no response back. If it is not possible to retrofit the Airgrabber I will probably just stick with my homemade setup. It takes in air directly thru the SRT10 Hood Scoop.

[89gtcs]

Sounds like you've got a pretty good setup as is. Pics?

[ATXHEMI]

The Air Grabber is setup for the newer motors. The throttle body is in a completely different spot. I don't see it working on a 3rd gen.

[Falcon]

Just a bit of info on the SRT hood from back when I had a Viper Truck. They actually wind tested the truck and found that the scoop in the hood drew hot air out of the engine bay at speed instead of drawing air in. The debate on the subject at the time was the affect of hooking an intake to that scoop....if it would actually then force air in. At the time there was no definitive answer but something to think about.