Cruise control help needed!! - Hemi Truck Club
 
Go Back   Hemi Truck Club > HEMI | Trucks and Special Editions > 3rd Generation Ram | 2003 - 2008
Reload this Page Cruise control help needed!!

Like Tree6Likes
Reply
Page 1 of 3 1 23
 
Thread Tools Display Modes
 
Old 07-09-2020, 04:42 PM   #1
Junior Member
 
Steffensracing's Avatar
 
Join Date: Jul 2020
Posts: 8
Cruise control help needed!!
All, new here. I have a 05 1500 I did a 4-6 drop on, ever sense I lowered it my cruise shuts off over 50mph. Not sure what to do, please help!

Steffensracing is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-09-2020, 07:32 PM   #2
Greg
 
Redtruck-VA's Avatar
 
Join Date: Jan 2011
Location: Virginia
Posts: 19,954
Garage
I've lost my cruise when I swapped to a 05 pcm in my 03. There is something undocumented in the wiring. In your case I would check the front wheel sensor. Not plug in or damaged wire when you did the drop.
Welcome to HTC..
__________________
2003 RCSB, 2wd, "Pro-Street"
6.4L/cog driven V7-Ysi/46rh trans/HTH Truckarm coilover suspension. HP Tuning...

1956 Jeep Willys Pickup Hemi powered "Street Rod project"

1# 2017 HTC FASTEST HEMI List....
Current 1/4 mile [email protected] (2018)
Current 60' PB 1.351 (2019) mechanical issue for 1/4m

HTC 2018 TOTY
HTC 2020 TOTM

Support vehicle- 2007 QC G56 4x4 diesel
Redtruck-VA is offline   Reply With Quote
Old 07-09-2020, 07:38 PM   #3
Junior Member
 
Steffensracing's Avatar
 
Join Date: Jul 2020
Posts: 8
Thank you. I did replace the left front bearing at the same time, maybe it’s not compatible? But it works great till 52 mph?
SUPER BEE likes this.
Steffensracing is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 07-10-2020, 05:54 AM   #4
Queen Kima - Whemi BOD
 
Mrs.Studmuffin's Avatar
 
Join Date: Sep 2005
Location: Denison, TX
Posts: 10,573
__________________
.
Not everyone can be queen.....there has to be someone standing on the curb to wave as I go by.
.
Mrs.Studmuffin is offline   Reply With Quote
Old 07-10-2020, 10:52 AM   #5
Board of Directors "Phil"
 
GodsRodsHEMI's Avatar
 
Join Date: Oct 2004
Location: Orlando
Posts: 4,815
Garage
welcome
__________________
silver 04 SLT QC 4x2/HEMI/ 20"chrome wheels/A.R.E. LSII Tonneau/HEMI logoed bedliner/
tow/haul button/full power Leather seats/ HEMI embroidered headrests/Billet style "HEMI" door inserts and door pillar inserts/black DEE ZEE Nerf bars/ custom graphic stripes by westside vinyl & graphics/Tinted windows/billet(brushed)fuel door(locking)/HEMI with rams head embroidered floor mats/H.T.C. Trible window Logo's/Husky Liners Mudflaps/Sonar gen 3 taillights/Super chip programer
Shaved Tailgate handle w/Sir Michaels handle relocator.
True Duals w/Flow master 50 series (Delta Flows) and IMCO performance exhaust X pipe and LXP stainless tips.Mopar rear wheel well liners.
Billet "BIG MOUTH GRILLE" by Precision grilles,T-REX Billet bumper insert.,HAMBEK SIXPACK HOOD W/RamAIRBOX
Future mods: ??
view my website at http://philbonc.50megs.com/photo6.html
more pics from HEMI in the hills taken by KenandJenn 2005


2011 SRT8 Challenger 392 HEMI Inaugural edition #0925 of 1100 made for USA
GodsRodsHEMI is offline   Reply With Quote
Old 07-11-2020, 03:31 PM   #6
John
 
SUPER BEE's Avatar
 
Join Date: Feb 2014
Location: Meridian
Posts: 3,968
Garage
Quote:
Originally Posted by Steffensracing View Post
Thank you. I did replace the left front bearing at the same time, maybe it’s not compatible? But it works great till 52 mph?
__________________
SUPER BEE is offline   Reply With Quote
Old 07-11-2020, 08:41 PM   #7
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,742
Garage
Welcome to HTC!

Simply lowering it should not have had an effect that’s for sure. Your going to need a scanner for this one to see what your
Loosing and when though
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 07-11-2020, 10:00 PM   #8
Junior Member
 
Steffensracing's Avatar
 
Join Date: Jul 2020
Posts: 8
Thanks everyone for the welcome, I’ve scanned with HP tunner, but no codes, will I need something else??
Steffensracing is offline   Reply With Quote
Old 07-12-2020, 10:05 AM   #9
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,742
Garage
Yes your going to need to see the abs module for wheel speeds and also all the trans outputs
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 07-12-2020, 11:47 AM   #10
Junior Member
 
Steffensracing's Avatar
 
Join Date: Jul 2020
Posts: 8
So will I need more than a typical hand held scanner?
Steffensracing is offline   Reply With Quote
Reply
Page 1 of 3 1 23

« Evaporator core quick connect problem.... | - »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 09:35 AM.

Contact Us - Advertise - Hemi Truck Club - Archive - Top

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
 
Terms of Use
Copyright
Privacy Policy