04-14-2017, 06:34 AM
Join Date: Dec 2016
old school 383 Mopar
Not sure if any of you will be interested, but Thought I'd post it any way, I'll post some photo's tomorrow .
1968 383, 1st this Engine was built back in 2003 for a D100 drag truck, truck was sold in 06, motor was pulled after 35 Runs Truck weighed 3600+/- 50 with my fat a$$ in it. ran deep in to the 11's @ 114ish could of run into the High 10's with more gear.
NON hp block .060 over, std Stroke, steel .010 mains and rods.
TRW 11.5 Comp pistons ,Crane .680 Lift Mech cam.
906 heads stock 2.08 1.74 valve size ,Manley Valves, Mopar 077 springs, titanium 10 degree retainers, Heads were ported by Huges Engines , I don't remember the flow numbers or chamber volume.
Holly Street Dominator intake, No Rockers or Pushrods ARP Head, Main studs and rod bolts.
Morso Rear sump pan. block is cut for 1/2 hemi pick up tube(no tube used it in a 440 build)
aftermarket Damper, I forget the make(not an ATS damper), small single grove crank pulley, I think it was a mopreformance under drive.
It's been siting in the back of the garage since pulled, A few years with cover a few years with out, motor is dirty and dusty, more of a parts donor or builder your choice.
I can ship it. I'd like to get $500. I'll work on a shipping price for HTC members , for Non Members I'll add $50 for palletizing ,