It's In - Hemi Truck Club
 
Go Back   Hemi Truck Club > HemiTruckClub Community Forums > HemiTruckClub Drivers Lounge (Community Discussions)

Reply
 
Thread Tools Display Modes
 
Old 03-16-2005, 09:36 PM   #1
 
Join Date: Feb 2005
Posts: 275
It's In

Well It's in My lord did it take a while the initial removal of oem rez and filter was no problem at all. Mounting the first elbow to the tb went smooth also. However, installing the down pipe was a whole different ball game. THe first try none of the brackets seemed to match up I tried several different methods ultimately I seperated the two pipes and connected the brackets closest to the radiator first and worked my way backward. This smoothed out the whole process and I finished up quickly after this. The air filter is a snug fit and an extra pair of hands would help with filter install. I had my daughter push from underneath while I torqued the pipe off the wheelwell and it slid on realy smooth that way. Unfourtuneatly it's raining so I did not have a chance to take my boy out for a real run, but it does sound better. Hopefully thursday will be better.


3girls is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 03-16-2005, 09:40 PM   #2
Director Emeritus
 
MrHemi's Avatar
 
Join Date: Jun 2004
Location: Western NC
Posts: 40,856
Garage
It's In

Good job buddy! Looks like a professional installation...
Let us know what you think after you take her for a spin!
MrHemi is offline   Reply With Quote
Old 03-16-2005, 10:00 PM   #3
mindy's hemi
Guest
 
Posts: n/a
It's In

Looks good 3girls. let us know how it performs when our weather gets better. Gonna be at Ft. DeSoto in April?
  Reply With Quote
Sponsored Links
Advertisement
 
Old 03-19-2005, 09:58 AM   #4
 
Join Date: Feb 2005
Posts: 275
It's In

Quote:
quote:Originally posted by mindy's hemi "Satch":
Looks good 3girls. let us know how it performs when our weather gets better. Gonna be at Ft. DeSoto in April?
I hope to, Mr.s 3girls is trying to get the day off so the whole crew can come.
3girls is offline   Reply With Quote
Old 04-06-2005, 07:26 PM   #5
 
Join Date: Feb 2005
Posts: 275
It's In

Well I've had it in for a while and I like the sound I get with it and I am certain it breathes better simple physics there. Horsepower I dont know I went back and reviewed MR.Hemis install one thing I did not do was disconnect the neg cable. I may go unhook it to recalibrate the ecm and try again.
3girls is offline   Reply With Quote
Old 04-06-2005, 08:24 PM   #6
Director Emeritus
 
MrHemi's Avatar
 
Join Date: Jun 2004
Location: Western NC
Posts: 40,856
Garage
It's In

Well it has been an hour how'd ya make out?
MrHemi is offline   Reply With Quote
Old 04-06-2005, 09:38 PM   #7
 
Join Date: Feb 2005
Posts: 275
It's In

Quote:
quote:Originally posted by MrHemi:
Well it has been an hour how'd ya make out?
Man I wish, my daugther had a cold and gave it to my wife who loves me so much she had to share it with me Thank GOD for Nyquil. So here I sit reading post and flippen channels driven me nuts I don't ever sit this long.
3girls is offline   Reply With Quote
Old 04-06-2005, 10:26 PM   #8
*Damn*its*gotta*Hemi*
Guest
 
Posts: n/a
It's In

Its better than boin out and smashin' that hemi!
  Reply With Quote
Old 04-08-2005, 06:30 PM   #9
 
Join Date: Feb 2005
Posts: 275
It's In

No doubt DIGH I would hate to crush as my wife claims MY OTHER WOMEN lol the HEMI
3girls is offline   Reply With Quote
Old 04-08-2005, 07:03 PM   #10
 
Join Date: Dec 2004
Posts: 1,497
It's In

Quote:
quote:Originally posted by 3girls:
Well I've had it in for a while and I like the sound I get with it and I am certain it breathes better simple physics there. Horsepower I dont know I went back and reviewed MR.Hemis install one thing I did not do was disconnect the neg cable. I may go unhook it to recalibrate the ecm and try again.
Just disconnecting the battery ground
does not do it on the Hemi Ram like it
does on other OBDII equiped vehicles.
You have to do the #23 fuse pull method
stated by MrBigwood. If you do it takes
at least 500 for the computer to put your
truck back at optimum performance. I did
not do a fuse pull or battery ground pull
when I installed my MIT intake. Mine seems
to be be running better every day.
04HemiBeast is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 01:44 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.