I would have your builder balence the Manley crank when they get it. I had mine done and my machinist said it was out enough to need it. It’s great peace of mind. Other then that the Manley kit seemed very high quality. All my tuning on my 05 pcm has been done remotily via email with the Forums resident CMR tuner Keith, and I would recommend him. He’s been very quick with getting revisions done after data-logs.
I went with a custom stroker cam from Inertia and it sure sounds good. It definitely is worth switching to an 05 pcm to have a cam that sounds like this
" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350">
Thanks for the reminder on doublechecking the Manley crank Chris, when I was following your build you mentioned that, even though it was balanced, it was still out a little bit. thank you
2003 Dodge Ram 5.7 hemi, RCSB, lowered McGaughys 2/4, Centerlines, Bilsteins,Stainless Longtube Headers, Superchips 91 tune, CAI, Magnaflow,190 Tstat, Transgo HD-2 w/resistor wired in plus Sonnax line pressure booster