Torque converter? - Hemi Truck Club
 
Go Back   Hemi Truck Club > Technical Forums > Drivetrain, Differential and Transmission

Reply
 
Thread Tools Display Modes
 
Old 01-29-2012, 04:48 PM   #1
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,240
Garage
Ok well as some of you guys know I have been toasting trans left and right because I didn't have the money for a built trans but I'm done when the 10th went out its time to bite the bullet and invest I'm going to be getting an ats or ATF trans not sure just yet but I already have a Streetedge converter and was wondering if anyone knew any places that won't rip me off on a rebuild if it's even possible to do or should I just get a new converter it's on a 6.4 10psi charged truck any advice is appreciated thanks in advance

__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 01-29-2012, 04:48 PM   #2
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,240
Garage
Ok well as some of you guys know I have been toasting trans left and right because I didn't have the money for a built trans but I'm done when the 10th went out its time to bite the bullet and invest I'm going to be getting an ats or ATF trans not sure just yet but I already have a Streetedge converter and was wondering if anyone knew any places that won't rip me off on a rebuild if it's even possible to do or should I just get a new converter it's on a 6.4 10psi charged truck any advice is appreciated thanks in advance
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Old 02-27-2012, 05:43 PM   #3
Junior Member
 
Join Date: Feb 2012
Location: Arizona
Posts: 16
I have the ATS trans and a Circle-D TC. Not sure if Circle-D does rebuilds or not. That's a sick truck you have there! What is your best 1/4?
__________________
2009 Ram 1500 Crew Cab - Deep Water Pearl Blue

2/4 Drop, 0212353 Retro Shop Projector Retrofit w/ custom paint, Gaylord Speedsturr Lid, Billet Badges, Bed Rug, Jet 180 T-Stat, AR LT Headers, ATS 545rfe w/ deep pan, Fastman 85mm TB,
Inertia MS Ported Heads, Inertia MS Cam, Circle-D 3000 TC, Billet Catch Can, Magnaflow 18", E-Cut out, Diablo Sport 91 tune, Addco Sway Bars
[email protected] N/A
[email protected] S.C.
Oh Yeah its a MagnaHEMI
KarateMan is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-27-2012, 07:42 PM   #4
2012 Truck of the Year
Engine Specialist
 
charged392's Avatar
 
Join Date: May 2011
Location: Fort pierce, FL
Posts: 17,240
Garage
Well I would like to say my best is way better than this but I can't launch no slicks or caltracs as of yet but

.561 rt
2.6 60'
13.4 1/4
115mph

So basically if we do the math assuming a great launch low 12s truck I need to get caltracs and slicks badly when I do it's going to be nice if I can break high 11s I'm set for a 5200 lb truck that would be sweet
__________________
"CMR TUNER" [email protected] 1/4 with a 7.32 1/8 custom long/short bars by "Me" Turbocharged 392 on 9psi S475/96/1.32 . Running thru an A518! [email protected]
charged392 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Premium Vendor Showcase
n2 Speed Edge InTune Edge OCPerformance Parts

All times are GMT -6. The time now is 02:40 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.