Hemi Truck Club banner

2020 on the works

2K views 13 replies 8 participants last post by  SUPER BEE 
#1 ·
After a few days of research, a few hours of work and a few bucks spent some progress has been made, the single 10" enclosure is done, amp rack is done, the $300 integration module is on the way, not decided on the speakers yet or their configuration but i'm using this awesome 5 channel amplifier from Soundstream for now.
 

Attachments

See less See more
2
#2 ·
Some more progress today, Pac AP4-CH41amplifier integration module is installed and running great, amplifier is wired and running on sub channel only for now, 6x9 component speakers for the front are on the way, not decided on the others yet
 

Attachments

#3 ·
Nice and clean. Good workmanship. :thumb:
 
#5 ·
I know absolutely nothing about in truck audio systems..........but I'll just say Nice work, Looks good.
 
#6 ·
Some more progress today, installed Diamond Audio 6x9 components in the front doors, there is only one place inside the door panel where the crossover can fit, Pac doesn't have a speaker harness adapter for the 2020 so i had to run all new wires for the front doors and dash, it was easier than i thought, sounds awesome, now i have to work on the rear doors, center channel and surround channels.
 

Attachments

#9 ·
Did the rear doors today, very easy, used 6x8 JBL Power series i had laying around, leftover from the Mustang, they sound great still of the factory amplifier, the new Polk Audio amplifiers PA D1000.1 and PAD4000.4 are installed, it looks like it has allot of room under the seat but really there isn't, i might have to lift the seats up to fir both 4 channel amplifiers but for now this works, i'm getting a bit of static noise at 0 volume i might need to go full digital with a DSP.
 

Attachments

#11 ·
when i seen that sundown you had my full attention <img src="http://www.hemitruckclub.com/forums/images/smilies/biggrin.gif" border="0" alt="" title="Big Grin" class="inlineimg" />, looks great man.
I have a 12" on the way.
Sundown Audio make great stuff, i have a pair of X12's on my GMC Envoy.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top